Operating Light DL 66CMW

The monitor is mounted on the wall inside the operating room.

The camera attached to the light head is commanded via the control panel and the camera is located in the handpiece section of the light head.

The light diameter can be adjusted between 12-30 cm. Light diameter adjustment can be made easily for wide or narrow surgical areas.

Through the sensors in the light heads, the light closes the relevant bulbs when it detects the surgeon head, and thanks to this feature,

heat increase in the surgeon's head and shadow formation in the operation area are prevented.

With the endoscopy mode on the control panel, the light can switch to endoscopy mode with one touch.

The light head does not close completely in endoscopy mode, providing a low level of ambient lighting.

The light heads have the feature of reaching the maximum light power with a single button.

Heads with low aerodynamic resistance in lamps protect laminar flow.

• Max. Luminous power at 1 m 160.000 lux
• Head diameter Ø650 mm
• Number of titles 2
• Control panel (for each head) 4.3'' LCD touch panel
• Head focus diameter 120 - 300 mm
• Color temperature 3500k - 5000k (7 steps)
• Color discrimination index CRI RA 96%
• Light intensity adjustment 1-100%
• LED lifetime 50.000 hours
• Protection against water and dust IP 54
• Camera 1080p Full HD Camera
• Monitor 22'' medical monitor
• Irradiation level / Illuminance level Ee/Ec= 3.21 mW/m2.lx
• Head light depth 120 cm
• Header total consumption 85 W
• Endoscopy mode Yes
• Laminar flow harmony Yes