Operating Room Led Ceiling Lamp DL 62CMW

The monitor is mounted on the wall inside the operating room.

The camera attached to the lamp head is commanded via the control panel and the camera is located in the handpiece section of the lamp head.

There are 68 LEDs in the main head and 28 LEDs in the satellite head.

Thanks to the LED technology, it does not cause temperature increase in both the surgical area and the surgeon's head.
The life of the led bulbs used in the lamp heads is 60,000 hours.

Thanks to the sensors in the light heads, when the light detects the head, the relevant bulbs are closed and shadow formation in the operation area is prevented.

The light level can be adjusted between 1-100 on the control panel and helps the user to set the desired light level precisely.

All functions can be accessed with the touch LCD screen located on the edge of the light head.
Light heads with low aerodynamic resistance protect laminar flow in the theatre.

• Max. Illumination power at 1 m (Main head) 160.000 lux
• Max. Luminous power at 1 m (Satellite head) 120.000 lux
• Main head diameter Ø650 mm
• Satellite head diameter Ø440 mm
• Number of light head 2
• Control panel (for each light head) 4.3'' LCD touch panel
• Main head focus diameter 120 - 300 mm
• Satellite head focus diameter 150 mm
• Color temperature 3500k - 5000k (7 steps)
• Color discrimination index CRI RA 96%
• Light intensity adjustment 1-100%
• Parent topic Number of LED modules 68
• Number of satellite head LED modules 28
• LED lifetime 60.000 hours
• Protection against water and dust IP 54
• Camera 1080p Full HD Camera
• Monitor 22'' medical monitor
• Irradiation level / Illuminance level Ee/Ec= 3.21 mW/m2.lx
• Main head light depth 120 cm
• Satellite head light depth 100 cm
• Main topic total consumption 85 W
• Satellite head total consumption 55 W
• Endoscopy mode Yes
• Laminar flow harmony Yes